The idea of a leaky faucet can be viewed as a minor inconvenience or a catastrophe, depending on whether a person lets the problem go or whether they respond to it immediately.

Leaky faucets can cause water bills to rise and even indicate slow-building problems in plumbing hardware. When these issues aren’t addressed, it can be easy for the drip to continue coming down, the water costs to continue rising, and the hardware to continue functioning in its half-fixed state.

A leaky faucet in a bathroom or sink can be annoying.

The constant drip that occurs no matter how tight a person turns their water controls in the off direction can seem puzzling. However, this is one of the most basic types of plumbing problems out there.

Consequently, the fixes for it are not that involved.

This is one of the problems a person could handle themselves. While they may want a professional there to oversee it or provide guidance, this is one of the most common do-it-yourself tasks related to plumbing.

Whether it’s in a home, a business, or any other type of facility, a leaky faucet only takes some basic tools and a little bit of know-how to correct.

Starting Out: Preparing to Fix a Leaky Faucet 

Even if a person has never had to fix a dripping kitchen faucet or learn how to fix a leaky bathtub faucet, the process for doing either is usually quite simple in comparison to how most people picture it.

The complexities of plumbing make some people think it’s extremely hard and cumbersome to correct a drip in a faucet. But for those wanting how to fix a leaky kitchen faucet or how to fix a leaky bathroom faucet, the steps are usually similar.

First, turn off the water to the faucet.

This usually requires a person to follow the pipes under their sink. Around the spot where they go up, there is usually a faucet in place. Twisting this faucet clockwise will turn off the water.

Next, plug the drain.

If there isn’t an actual plug around, using a dishrag or wash cloth will suffice. This ensures screws and other small components won’t be lost during the repair.

Then, determine what type of faucet you’re working with. There are three main types – ball faucets, cartridge faucets, and ceramic-disk faucets.

These faucets get their name for the type of mechanism they use, which can be found by removing the screw from the single, swiveling faucet. If a faucet has two screws, it means it is a compression faucet – another common type.

Repairing a Leaky Compression Faucet

After preparing and identifying the type of faucet, the next step is to take action.

If it is a compression faucet, remove the coverings and screws on the hot and cold water sides. Stems and nuts will be visible below, along with a ring on top of a seat washer.

Washers can get worn out after a while, and this is one of the primary causes of the problem. The ring (known as an O ring) is also known for causing similar problems.

In order to get the leaking to stop, it may be necessary to replace one or both of these components.  This is true whether it’s kitchen or bathroom sink faucets that are causing the issue. Even shower faucets can see these components wear down over time.

Delta faucet repair companies and other specialists usually have access to replacement parts. In some cases, the parts can also be found at a local hardware store.

Fixing Other Types of Faucets 

For other types of faucets like the ball, cylinder, and disk types, it may be necessary to buy a repair kit. These kits contain the basic components people need to replace the entire faucet if necessary. But in some cases, there are easier ways to correct the problem.

After removing the screws and taking out the main component (be it a ball, disk, or cartridge) it is possible to see the washer and O ring. Replace these and reinstall the components, using the originals or a replacement kit to correct the leak.

Fixing a leaky faucet enables people to get peace of mind, helps them lower their water bills, and ensures their plumbing systems won’t incur slow-building damage over months and years.

Though a common leak is one of the most basic problems out there, not everyone tries to fix it themselves for fear it will be too complex. But with basic tools and components from the local hardware store, correcting a leaky faucet is easy.

Pin It on Pinterest

Share This